Step-by-Step Guide To Cut Up Your Own Hot Tub In 5 Minutes Or Less!

Posted by By Thomas De Silva February 15, 2023
How Cut Up Your Own Hot Tub In 5 Minutes Or Less!

If you’ve always wanted to cut up your own hot tub, this guide is for you! The idea behind this hot tub cutting guide is to get people excited about building their own old hot tub! Why store a non functional old tub, when you can cut it to get some childish fun. 

Well, with this easy-to-follow guide, that dream can become a reality in just minutes! In this guide, we’ll walk you through the essential steps needed to cut up your hot tub quickly and easily. We’ll also provide tips on how to make the process as smooth and easy as possible so that you can get started right away. So if you’re looking to cut up your own hot tub, this guide is for you!

 

Tools and materials needed

There are a variety of tools and materials you will need to cut a hot tub, including a saw, a miter saw, clamps, a drill, screws, and hot tub liner. Make sure to wear safety gear, such as goggles, a dust mask, and gloves, when working with these tools and materials.

You will need the following tools:

  • Old Hot tub
  • Tape measure
  • Level
  • Chalk line
  • Straight edge
  • Saw – a hand saw or a power saw will both work
  • Drill

 

You will also need the following materials:

  • Wood – 2″ x 6″ lumber is generally used for most hot tubs, but you may need something different depending on the size and shape of your hot tub. lumber can be either pressure treated or regular. talk to your local lumberyard to find out what is best for your area.
  • Spade or shovel – to dig the hole for your hot tub
  • Construction adhesive – this will be used to attach the wood to the hot tub itself.
  • Caulking – this will be used to seal any gaps or cracks between pieces of wood.
  • Flashing – this will be used to create a watertight seal around the hole where you will be placing your hot tub.

 

Let’s Start The Preparation For hot tub cutting

  1. Disconnect the power to the hot tub. Locate the main power breaker and switch it to the “Off” position.
  2. Drain the water from the hot tub by opening the drain valve at the bottom of the tub.
  3. Remove all of the accessories from the tub, such as the filter, jets and steps.
  4. Cut away any vinyl or plastic trim that is around the outside of the tub with a utility knife.
  5. Apply a strip of masking tape around the perimeter of the tub at least 2 inches from where you will be making your cut. This will help to prevent cracks from forming in the acrylic while you are cutting.

 

How to cut up a hot tub

First, you need to disconnect and drain the tub. Second, you will need to disconnect any electrical wires and gas lines. Finally, you will need to remove the tub from its location. 

Once the hot tub is disconnected and drained, Use a power saw to cut the hot tub. The best place to cut the hot tub is on the bottom so that the top of the hot tub is level. Cut a hole in the bottom of the hot tub so that you can access the wires. Next, cut a hole in the side of the hot tub so that you can access the pump. Don’t forget to cut a hole in the top of the hot tub so that you can access the jets.

You will need to Cut it up into smaller pieces so that it can be removed from the location. You can use a saw or a power drill to make the cuts. Be sure to wear safety glasses and gloves while making the cuts.

Finishing the cut hot tub

After the hot tub is cut up into smaller pieces, you can began removing it from the location. You may need help from another person or two when removing the larger pieces of the tub. Once all of the pieces are removed, you can dispose of them as you see fit.

 

Tips and tricks To cut a hot tub with fun

Destroying an old hot tub can be fun If you do it with some points in mind! Here are some tips and tricks to help you successfully move your hot tub:

  1. Remove any external fixtures such as steps, ladders, or handrails. These can often be unscrewed or unbolted from the main body of the tub.
  2. If your tub has an access panel, remove it so that you can get to the internal components of the tub. This will make it easier to disconnect and remove any electrical wiring or plumbing.
  3. Using a saw, carefully cut the acrylic shell of the tub into manageable pieces. It’s important to take your time with this step and make sure that each cut is straight so that the pieces will fit back together smoothly.
  4. Once the shell is cut up, start disconnecting any internal plumbing or electrical wiring. Make sure to label each piece so that you know where it goes when you reassemble the tub.
  5. With all of the internal components removed, you should now be able to easily carry the pieces of the hot tub through doorways and other tight spaces. Reassembly is simply a matter of following the reverse process of disassembly – just make sure to double check that all electrical wiring and plumbing is properly reconnected before filling the tub with water!

 

Safety considerations

When cutting up a hot tub, there are a few safety considerations to keep in mind. First, make sure that the power is disconnected and that the area is well-ventilated. Second, wear protective clothing, including gloves, goggles, and a dust mask. Third, use a saw with a carbide-tipped blade designed for cutting acrylic. And fourth, take your time and make sure each cut is straight and clean.